Share your CCNA v3.0 Experience

Hello Everyone..

Discount voucher Available

CCNA R&S
CCNA Security
CCNP R&S and Security
CCIE R&S

anyone need contact
Whtsapps Number : +19703151996

@wolverine121 can you please send me the dumpss
pavelbobchev00@gmail(.)com
thank you !

@ Mac
@Response to Alex

Thanks for the above clarification.

@ lima.

I beleive that it refers to Drag and Drop 3 question 8. same for mpls, vpn ,..they are all in drag and drop questions.

Heya guys just wondering for ACL Sim 1 do i need to make configurations and save it? because i have to configure fa0/0 twice.. One 104 in and one 114 in.. Thanks

Which two statements about MPLS are true? (Choose two.)
 It uses point-to-point physical circuits to provide logical full-mesh connections to the service provider.
 It requires a hub in a large data center with a fast connection to the service provider.
 All connections are full mesh with full redundancy.
 It provides easily scalable bandwidth to support newer connectivity options for numerous remote sites.
 Because it is a mature technology, it requires less skill to administer.
Correct answers given b and d, I think them are wrong, could anyone confirm If correct ones are C and D

The correct answer is A and D

BNasr – WRONG dude.. according to the DND -> use the logical full mesh OF a service provider.. not PROVIDE LOGICAL FULL MESH “TO”

stop teaching people wrong things..

Hola, Frame Reley entra en el examen??
Hi, Frame Reley enters the exam?

yesterday passed exam. 944/1000. No D&D Question. Total 62 Questions.
1) ACL2 Simulation -Type2 ,
2) ACL1
3) GRE Troubleshooting SIM.
4) Two Multihop BGP Questions.
5) Few other Few questions.
6) One objective asking for Loopback questions.
Thanks 9tut.the site is excellent. You can pass the exam if you study 9tut fully.

Client VPN
MPLS
Site to Site VPN
DMVPN

this is drag drop and it’s solved sequence

@Wolverine121

Could you share the latest dumps for 200-125 to i n t e g r a l s o n l i n e (a t) h o t m a i l (d o t) c o m?

Thanks in advance

For anyone having done the exam. How similar is 9tut’s description to the description in the actual exam?

thank you

Chance to get CCNA before Cisco change new Certifications. No more time, so get CCNA latest dump 2020.01.07 and take exam ASAP.
@Contact me to get share (VCE, PDF, PKT) with VCE tool player and all lab sim on Packet Tracer: saaau_holo(at)yaaahoo.com (replace aaa=a)

Hi!
Do you know where can I find how exam interface look?
Link from FAQs & Tips (point 9) don’t work.

Hi Guys,

Have completed my exam today CCNA composite and passed with 852 marks.
70% questions were from 9tut but problem is that not all answers are correct from this website. please @9tut have a check or perview on your questions.
Also had the same ACL CASE, EIGRP, DHCP lab sims.
3 drag and drop were their as well.

Thanks 9TUT!!

Please advice me how i can practise my CCNP exam now????…………………..

Can anyone who was taking the exam today confirm, whether the the questions are the ones @wolverine121 provided on page 47?

@onis
@Z

This is the drag and drop I referred.

+ Enable mobile devices to connect to an enterprise network: client VPN
+ Use the logical full-mesh network of a service provider across an enterprise headquarters and remote sites: MPLS
+ Securely connect two networks over an untrusted network: site-to-site VPN
+ Use GRE tunnels and IPSec to create a full-mesh network through a central location: DMVPN

Where do you guys get new questions 6-7??

Could someone confirm today’s labs on examen? Im taking it tomorrow :D

Take exam yesterday 900/1000

ACL2 Simulation,
ACL1
GRE Troubleshooting SIM.
Two Multihop BGP Questions.
New questinons about Loopback.
One D&D

Yesterday pass exam 957 all questions from 9tut Guys go for it very easy this site is wonderful
Thanks 9tut

was there any of these questions in the test today ?
– IIdp run
– 2 statement about R1 (code given)
– distance vector protocols
– show ntp associates
– DTP negotiation settings
– Redundancy & reliability
– critical
– 64 bytes
– 2 statements about stacking cisco switches
– Inside local & inside global
– route will not accept the addressing scheme (diagram)
– 2 address spaces valid Class B ipv4 ranges
– all options starting with Verify that (diagram [2 Pc, 2 SW , 2R , 2 servers])
– 2 functions performed by local DNS server
– the PPP session phase
– 1 benefit of PVST+
– 2 advan do dynamic provide over static routing
– all prefixes on the interface
– a wireless lan controller
– 1 statement about loopback testing on a router serial int
– 6to4
– the assigned DNS server is down (answer)
– Multichasses Ether Channels
– 2 facts configuring EIGRPv6 true
– control plane
– portFast
– vlan.dat
– reload the OSPF process
– default router
– router bgp 1 (diagram)
– 2 benefits UDP protocol for application traffic
– 2 statements about DNS lookup operations
– VLAN 5 (diagram)
– 3 options are types of IPv6 static routes
– store & forward
– 2 diff B/w distance vector link state routing
– 2 state about MPLS
– MPLS (answer)
– 0*2142
– preempt
– 2 state describe ping utility
– RJ 45 connector (1 & 2 are answers)
– which command disables DTP
– application , session & presentation
– spanning tree portfast bpduguard
– switchport port security mac address sticky
– 3 state about Syslog utilization
– lowest SW priority & lowest MAC address (answer)
– 2 Qos tools provide congestion management
– ICMP echo
– MPLS (answer again, it’s different question)
– 1000 BASE SX
– router ID
– switch#
– router ospf process id
– sequence number
– trace route (bold in question)
– REST
– define inside & outside interfaces
– standby 10 preempt
– standby 10 priority 150
– top down , divide & conquer
– change the VTP mode (all options in answers are starting with this)
– switchport nonegotiate
– ip default network (bold in question)
– shielded & unshielded twisted pair
– show license & show license UDI
– 2 state forwarding decisions
– CDP
– the firewall
– 2 stat about GRE tunnels
– under the multilink interface
– the same frame is sent 16 times
– BPDU
– local7
– /127
– copy
– lldp reinit 5

Please help with these questions.

1. When you need to erase a mistake in the middle of a command, can you use the left or right arrow key in the exam?

2. For Access_list SIM 2, how do you know or check the IP address of the server and host given? Will be given their IP addresses or you’d have to look for it yourself and if so how do you go about it?
Or do you just assign any IP address to the server and host from the given network addresses?

@Alex good question maybe you can obtain the host ip on cmd> ipconfig

I dont know im taking exam tomorrow, and I think there’s no way to get ip from server as you can do a sh arp (you will now mac address but no what it does belong to)

@Alex

It will be given their IP addresses. You can read it in text of question.

I passed today with 9XX.. im just wondering for all those who passed, how long did you wait to get ur grade from “pass” to “valid”?

router# configure terminal
router(config)# ntp authentication-key 42 md5 aNiceKey
router(config)# ntp trusted-key 42
router(config)# ntp authentication-key 35 md5 aBetterKey
router(config)# ntp trusted-key 35
router(config)# ntp authenticate
router(config)# copy running-config startup-config
router(config)#

3 comandos para Configuración Ntp authentication

@jeraldP – was wondering what your current grade is? Pass or Valid? i got 944 but in the paper it says we need to get valid

Which two facts must you take into account when you deploy PPPoE? (Choose two.)
A. DDR idle timers must be configured to support VPDN logging
B. DDR is not supported
C. You must manually configure IP addresses on the PPPoE interface
D. PPPoE supports a maximum of 10 clients per customer premises equipment
E. An individual PVC can support one PPPoE c

what’s the correct answer to this question
Answer C & D or B & D