Share your CCNA v3.0 Experience
August 23rd, 2016
Go to comments
Note: The last day to take this CCNA 200-125 exam is February 23, 2020. After this day you have to take new CCNA 200-301 exam. If you want to find out more about this new exam please visit here. |
Note: We have a topic of Frequently Asked Questions & Tips for CCNA learners, surely you will find valuable information about the CCNA exam there.
Please share with us your experience after taking the new CCNA 200-125 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Your posts are warmly welcome! Hope you will find useful information from friends who have taken the CCNA exam!
Note: Email is not allowed to show in comment section.
255. Which function can be centralized in software-defined networking?
A . data plane
B . application plane
C . control plane
D . services plane
C CONTROL PLANE
197. Which two statements about southbound APIS are true? (Choose two.)
A . OpenFlow is a southbound API standard.
B . They communicate with the management plane.
C . They use HTTP messages to communicate.
D . They enable communication between the controller and the network device.
F . They enable communication between the controller and SDN applications.
A AND D
256. How many bits in length is a VLAN identifier?
A . 32
B . 48
C . 16
D . 64
16
241. Which action do you take to reset the VTP configuration revision number on a switch in VTP server made?
A . Change the VTP domain name to any new value, and then change the name back to the original name
B . Change the VTP mode to transparent, and then change it back to server mode
C . Change the VTP mode to off, and then change it back to server mode.
D . Change the VTP mode to transparent, and then change it to cent mode.
A
VIII.249. Which statement about switch ports is true?
A . The default VLAN and native VLAN must be different on al ports
B . VLAN 1 is preconfigured as the native VLAN on trunk ports only.
C . VLAN 1 is preconfigured as the default VLAN on all switch ports.
D . VLAN 100 is preconfigured as the native VLAN on al switch ports
C
Which feature or protocol must you enable so that the output of the show interfaces trunk command includes information native VLAN mismatches?
A . CDP
B . PortFast
C . DTP
D . RSTP
A
Hello wolverine121
Please CCNAv3 R&S damps
nelpapa12@gmail (.)com
Thanks
Hi Guys,
I have some dumps.
I made the exam today and passed.
A lot of DnD questions, ACL lab, and another about NTP.
Put here the e-mails and I will try to send you
@dmartins please send me
poweredbycai2 at hotmail dot com
@dmartins Could I please have dumps? contact me donotexist666@gmail(.)com
Hey
Just want to know what is this NTP lab? is it new?
Hello @ dmartins
I’m going To have CCNA 200-125 exam next week. I would be glad if you share with me the latest questions. Thanks in advance
Please CCNAv3 questions 1-7
oa554537@gmail (.)com
@dmartins please send me
yan_kee300 at gmail dot com
Hi!!! Can anyone please share recent valid dumps? really grateful.I have my exam in 2 weeks.
@wolverine can you pls help?
EMAIL sophiacode703 at gmail dot com
I passed the exam Yesterday
FYI
Had GRE multi link sim, ACL 2 sim, EIGRP GRE Troubleshooting Sim, some drag & drop questions.
@nhema did you have access to the ‘show run’ command during the sims?
@nhema did the ACL 2 sim consist of different IP addresses and not different protocols? (HTTP)
these are gud questions please answear
4. After you configure a DHCP server on VLAN 10 to service clients on VLAN 10 and VLAN 20, clients on VLAN 10 are given IP address assignments. But clients on VLAN 20 fail to receive IP addresses. Which action must you take to correct the problem?
A. Configure the ip helper address command in the DHCP server configuration.
B. Configure the DNS name option in the DHCP server configuration
C. Configure a separate DHCP server on VLAN 20
D. Configure the default gateway in the DHCP server configuration
5. Which function can be centralized in software-defined networking?
A. data plane
B. applicadwtion plane
C. control plane
D. services plane
ok go and check your emails
@wolverine121 and @dmartins
Could you please send ccna 200-125 dump for me.
contact me Kwang_liv@hotmail(.).com
Thank.
Passed my test today. 9tut material very helpful. Some questions not here but if you understand concepts they’re easy to answer.
@Anonymous, were you able to use the ‘show run’ command during the sims??
Hi guys, i have my CCNA 200-105 next week and I have signed up for 9tut premium. Are the questions on that right hand side of 9tut, plus studying the lab simulator questions enough? Thanks!
if anyone has 200-125 dump please forward to me. i really really appreciate
metroelecinfo(at)gmail (dot) com
Already sent to you guys!
@dmartins hey i didn’t receive, can you please send me dumps :) donotexist666@gmail(.)com
Yes I was @@Anonymous
Hey, guys) have anyone valid dump file for 200-125 exam? Can you send me to rmorozov (.) spb@gmail (.) com
thx
Please i have exam next week. please latest ccna dump
maryleinemerci (@) gmail com
Hi, guys. PLZ send me dump file pliz-plox
rm05 (@) mail ru
I take the CCNA exam next week. Can anyone give me the latest dump? Please.
yamamorimizumori (at) gmail.com
Dmartins i would appreciate it if you would send me the dumps you used and give me some guidance {email not allowed}
Hello @ dmartins
please can you share me dumps
ccna456 @ gmail(.)com
Can anyone help me with below Q?
1. Which specification supports full-duplex traffic only?
A. 100BASE-TX
B. 1000BASE-SX
C. 1000BASE-TX
D. 10BASE-T
2. Which two statements about how a router makes forwarding decisions are true? (Choose two.)
A. The control plane forwards traffic based on information that it receives from the data plane
B. The data plane gathers information from routing protocols
C. The management plane forwards traffic based on information that it receives from the data plane
D. The control plane gathers information from routing protocols
E. The data plane forwards traffic through the router
F. The management plane gathers information from routing protocols
3. Which statement about loopback testing on a router serial interface is true?
A. Traffic passes through the interface with both software loopbacks and hardware loopbacks
B. Traffic is dropped with a hardware loopback, but traffic passes through the interface with a software loopback
C. Traffic is dropped with a software loopback, but traffic passes through the interface with a hardware loopback
D. Traffic is dropped with both software loopbacks and hardware loopbacks