Share your CCNA v3.0 Experience

please share dumps for CCNA 200-125 exam as I have scheduled next week.

roma.patel* @ gmail* . come * (Please remove all astersik)

Which command must you enter to guarantee that an HSRP router with higher priority becomes the HSRP primary router after it is reloaded?
A. standby 10 priority 150
B. standby version 2
C. standby 10 preempt
D. standby 10 version 1
the ans is a suppose we have two routers with the same proprity and you want the same router to become always the master you change the priority to higher priority. by default the priority is 100.
preempt only makes the standby to become master.

check your emails

today 2 pass

casbriv32(at)gmail(dat)com
Send newest dump please

Hi guys,

Is there anyone who passed exam and can share with me 9tut account? I have my exam in two days and need to training LABS. Will appreciate a lot.

FANNSKY774 at onet pl

@wolverine121 Could you please share me CCNP route dumps.
Email Id ccnp9723atgmail.com replace at by ‘@’….Thanks in advance..

@felix I had a couple new BGP configuration and troubleshoot questions (not labs), a couple new IP SLA, Some IPv6 and AIP ACL – if you study as well as practice the questions you will be fine.

@0svaldo, Awesome, thank you. I’ve gone through every question on 9tut trying to not just memorize them along with study. I’m sitting the exam soon and I don’t think I’ll ever feel 100% confident but I guess no one ever does with exams like this.

Hi everyone,

I will take the exam Wednesday.

Please send me me the latest CCNA dumps/questions
dj escambray @ hot mail (dot)com

Thank you.

poweredbycai2(at)hotmail(dat)com
Send newest dump please

Hello @0svaldo

I’m going To have CCNA 200-125 exam next week. I would be glad if you share with me the latest questions. Thanks in advance
Please CCNAv3 questions 1-7

oa554537@gmail (.)com

Kindly goto below gmail drive link and download valid and accurate file for ccna 200-125. Share with your other friends and let me know here after passing the exam.

https://drive.google.com/open?id=1OTW3oThdP4b1xffZ3N1Y2cciQeTIv4Jw

check your emails please i have send you an email

waiting for reply ^_^

can someone send me latest 200-125 dump please? davidlofe@outlook (.)com

@wolverine121 can you send me latest dump please? davidlofe@outlook (.)com

Can some one pls send me the latest dump bv13test@ outlook com

1. Which two statements about MPLS are true? (Choose two)

A. It uses point-to-point physical circuits to provide logical full-mesh connections to the service provider
B. It requires a hub in a large data center with a fast connection to the service provider
C. All connections are full mesh with full redundancy
D. It provides easily scalable bandwidth to support newer connectivity options for numerous remote sites
E. Because it is a mature technology, it requires less skill to administer

2. Which statement about switch ports is true?

A. The default VLAN and native VLAN must be different on al ports
B. VLAN 1 is preconfigured as the native VLAN on trunk ports only
C. VLAN 1 is preconfigured as the default VLAN on all switch ports
D. VLAN 100 is preconfigured as the native VLAN on al switch ports

3. Which two statements describe key differences between single- and dual-homed WAN connections? (Choose two)

A. Dual-homed WAN connections are more expensive than single-homed connections
B. Dual-homed WAN connections have more management-application overhead than single-homed connections
C. Dual-homed WAN connections require more skill to administer than single-homed connections
D. Dual-homed WAN connections have a simpler topology than single-homed connections
E. Dual-homed WAN connections have higher WAN speed than single-homed connections

4. After you configure a DHCP server on VLAN 10 to service clients on VLAN 10 and VLAN 20, clients on VLAN 10 are given IP address assignments. But clients on VLAN 20 fail to receive IP addresses. Which action must you take to correct the problem?

A. Configure the ip helper address command in the DHCP server configuration.
B. Configure the DNS name option in the DHCP server configuration
C. Configure a separate DHCP server on VLAN 20
D. Configure the default gateway in the DHCP server configuration

5. Which function can be centralized in software-defined networking?

A. data plane
B. application plane
C. control plane
D. services plane

6. Which statement about switch ports is true?

A. The default VLAN and native VLAN must be different on al ports
B. VLAN 1 is preconfigured as the native VLAN on trunk ports only
C. VLAN 1 is preconfigured as the default VLAN on all switch ports
D. VLAN 100 is preconfigured as the native VLAN on al switch ports

7. Which two commands can you use to verify an IP SLA? (Choose two)

A. show ip sla application
B. show ip sla reaction-configuration
C. show ip sla statistics
D. show ip sla configuration

8. Which command must you enter to guarantee that an HSRP router with higher priority becomes the HSRP primary router after it is reloaded?

A. standby 10 priority 150
B. standby version 2
C. standby 10 preempt
D. standby 10 version 1

Can any body provide me the correct ans for this question.
I am confused…. Would be great
Thanks

1) B,D
2) C
3) A,C
4)C
5)C
6)C
7)C,D
8)A or D, i think it is A

Could anyone please answer on the below listed Q? Thanks guys :)

255. Which function can be centralized in software-defined networking?

A . data plane
B . application plane
C . control plane
D . services plane

197. Which two statements about southbound APIS are true? (Choose two.)

A . OpenFlow is a southbound API standard.
B . They communicate with the management plane.
C . They use HTTP messages to communicate.
D . They enable communication between the controller and the network device.
F . They enable communication between the controller and SDN applications.

256. How many bits in length is a VLAN identifier?

A . 32
B . 48
C . 16
D . 64

241. Which action do you take to reset the VTP configuration revision number on a switch in VTP server made?

A . Change the VTP domain name to any new value, and then change the name back to the original name
B . Change the VTP mode to transparent, and then change it back to server mode
C . Change the VTP mode to off, and then change it back to server mode.
D . Change the VTP mode to transparent, and then change it to cent mode.

VIII.249. Which statement about switch ports is true?

A . The default VLAN and native VLAN must be different on al ports
B . VLAN 1 is preconfigured as the native VLAN on trunk ports only.
C . VLAN 1 is preconfigured as the default VLAN on all switch ports.
D . VLAN 100 is preconfigured as the native VLAN on al switch ports

Which feature or protocol must you enable so that the output of the show interfaces trunk command includes information native VLAN mismatches?
A . CDP
B . PortFast
C . DTP
D . RSTP

Hi guys, please also help me with the below Q:

192. You are implementing WAN access for an enterprise network while running applications that require a fully meshed network, Which two design standards are appropriate for such an environment? (Choose two.)

A/ a dedicated WAN distribution layer, to consolidate connectivity to remote sites
B/ a centralized DMVPN solution, to simplify connectivity for the enterprise
C/ multiple MPLS VPN connections with static routing
D/ a collapsed core and distribution layer, to minimize costs
E/ multiple MPLS VPN connections with dynamic routing

After you deploy a new WLAN controller on your network, Which two additional tasks should you consider? (Choose two.)

A/ Configure multiple VRRP groups.
V/ Configure additional VLANs.
C/ Configure additional security policies.
D/ Deploy load balancers.
E/ Deplay POE switches.

VIII.81. Which two statements about RFC 1918 addresses are true? (Choose two.)

A/ They require Network Address Translation or Port Address Translation to access the Internet.
B/ They have reserved address space for Class A and Class B networks only.
C/ They must be registered.
D/ They provide security to end users when the users access the Internet.
E/ They increase network performance.

167. You are configuring a 100-Mb fast Ethernet connection between a PC and Switch. Which action must you take to configure the speed one each of the two interfaces?

A/ Set the switch port to auto-negotiate and the PC interface to 100 Mb
B/ Set both interfaces to auto-negotiate.
C/ Set the switch port to 100 Mb and the PC interface to auto-negotiate.
D/ Set both interfaces to 100 Mb

79. You apply a new inbound access list to routers, blocking UDP packets to the HSRP group. Which two effectsdoes this action have on the HSRP group process? (Choose two.)

A/ HSRP redundancy works as expected
B/ Both the active and standby routers become active
C/ The active router immediately becomes the standby router.
D/ HSRP redundancy fails.
E/ The routers in the group generate duplicate IP address warnings

Travis, please stop filling the comment section unnecessarely. You can find all the answers if you google them.

Hey guys,

does anyone have any idea how much time approximately does someone need for studying the labs?
I’m still studying the questions, but I don’t know how much time to calculate for all the lab sims.

I have some practical experiences, so I’m not going to learn everything by heart.

192 / a;b
2/ V/ Configure additional VLANs.
E/ Deplay POE switches

81/ a;d
167/ b
79/ b;d

I found many answers in Internet and I want to confirm which one are correct. I am sorry for spam.

@9tut thanks for everything passed 876/1000

Guys stop ip if you buy the premium and do dumps and question you have enought material to pass

good luck all

EIGRP/GRE/ACL SIMS

@lasmas, congrats on the pass! – did the ACL only have different IP addresses, and were you able to use the show run command?

Thank you IP helper, God bless you

Thankyou lasmas for the confirmation and Congratulations on your achievement

ha ha ha :P

Hello

Can I have the latest dump please ?

travis
192. You are implementing WAN access for an enterprise network while running applications that require a fully meshed network, Which two design standards are appropriate for such an environment? (Choose two.)
A/ a dedicated WAN distribution layer, to consolidate connectivity to remote sites
B/ a centralized DMVPN solution, to simplify connectivity for the enterprise
C/ multiple MPLS VPN connections with static routing
D/ a collapsed core and distribution layer, to minimize costs

A & B

E/ multiple MPLS VPN connections with dynamic routing
After you deploy a new WLAN controller on your network, Which two additional tasks should you consider? (Choose two.)
A/ Configure multiple VRRP groups.
B/ Configure additional VLANs.
C/ Configure additional security policies.
D/ Deploy load balancers.
E/ Deplay POE switches.
B and E

VIII.81. Which two statements about RFC 1918 addresses are true? (Choose two.)
A/ They require Network Address Translation or Port Address Translation to access the Internet.
B/ They have reserved address space for Class A and Class B networks only.
C/ They must be registered.
D/ They provide security to end users when the users access the Internet.
E/ They increase network performance.
A&D

167. You are configuring a 100-Mb fast Ethernet connection between a PC and Switch. Which action must you take to configure the speed one each of the two interfaces?
A/ Set the switch port to auto-negotiate and the PC interface to 100 Mb
B/ Set both interfaces to auto-negotiate.
C/ Set the switch port to 100 Mb and the PC interface to auto-negotiate.
D/ Set both interfaces to 100 Mb
B
79. You apply a new inbound access list to routers, blocking UDP packets to the HSRP group. Which two effectsdoes this action have on the HSRP group process? (Choose two.)
A/ HSRP redundancy works as expected
B/ Both the active and standby routers become active
C/ The active router immediately becomes the standby router.
D/ HSRP redundancy fails.
E/ The routers in the group generate duplicate IP address warnings
B AND D