Share your CCNA Experience

Any site like 9tut.com which has dumps for Palo Alto PCNSE ?
just wanted to be sure before answering the exam.

Thanks and Regards,
JS

Eray thank you for your feed back and advise

Hi
I am taking CCNA 200-301 exam on kindly share the latest Dumps and Labs if you have.
I will be very thankful to you
Thanks
begzodbekodilov8@gmail (.)com

@Anonymous

Which command automatically generates an IPv6 address from a specified IPv6 prefix and MAC address of an interface?

A. ipv6 address dhcp
B. ipv6 address ads2001:068:5:112::64 eui-64
C. ipv6 address autoconfig
D. ipv6 address 2001:068:5:112:2/64 link-local

Is the correct answer B or C and why?

C is answer
It takes prefix from RA then put MAC address and add FFFE padding to generate IPv6 address
Eg:2001::ab11:12ff:fe11:1211
MAC is 48bit
Fffe padding is 16bit

RA=router advertisement

@MMM

I need help with these questions also:

1.

Which command automatically generates an IPv6 address from a specified IPv6 prefix and MAC address of an interface?

A. ipv6 address dhcp
B. ipv6 address 2001:068:5:112::64 eui-64
C. ipv6 address autoconfig
D. ipv6 address 2001:068:5:112:2/64 link-local

The correct answer is B or C

The question asks which command automatically generates an IPv6 address; the question does not give a specific example of an MAC address eui-64.

Explanation:
The “ipv6 address autoconfig” command causes the device to perform IPv6 stateless address auto-configuration to discover prefixes on the link and then to add the EUI-64 based addresses to the interface. Addresses are configured depending on the prefixes received in Router Advertisement (RA) messages. The device will listen for RA messages which are transmitted periodically from the router (DHCP Server). This RA message allows a host to create a global IPv6 address from:
+ Its interface identifier (EUI-64 address)
+ Link Prefix (obtained via RA)
Note: Global address is the combination of Link Prefix and EUI-64 address

2.

A frame that enters a switch fails the Frame Check Sequence. Which two interface counters are incremented? (Choose two)

A. Runts
B. Giants
C. Frame
D. CRC
E. Input errors

The correct answer is DE or CD

Explanation:
Frames are discarded and are not pass on error detection logic as implemented; as you know, CRC is a cyclic redundancy checksum
The “input errors” is a total of many counters including runts, giants, no buffer, CRC, frame, overrun and ignored counts.

3.

Refer to exhibit. An engineer is configuring the New York router to reach the Lo1 interface of the Atlanta router using interface S0/0/0 as the primary path. Which two commands must be configured on the New York router so that it can reach the Lo1 interface of the Atlanta router via Washington when the link between New York and Atlanta goes down? (Choose two)

Configured interfaces:
Atlanta:
S0/0/0: 2012::1/126
S0/0/1: 2013::1/126
Loopback1: 2000::1/128 New York:
S0/0/0: 2012::2/126
S0/0/1: 2023::2/126
Loopback2:2000::2/128 Washington:
S0/0/0: 2023::3/126
S0/0/1: 2013::3/126
Loopback3: 2000::3/128

A. ipv6 route 2000::1/128 2012::1
B. ipv6 route 2000::1/128 2012::1 5
C. ipv6 route 2000::1/128 2012::2
D. ipv6 route 2000::1/128 2023::2 5
E. ipv6 route 2000::1/128 2023::3 5

The correct answer AE or AD

Floating static routes are static routes that have an administrative distance greater than the administrative distance (AD) of another static route or dynamic routes. By default a static route has an AD of 1 then floating static route must have the AD greater than 1. Floating static route has a manually configured administrative distance greater than that of the primary route and therefore would not be in the routing table until the primary route fails.

4.

Refer to the exhibit. What does router R1 use as its OSPF router-ID?

A. 10.10.1.10
B. 10.10.10.20
C. 172.16.15.10
D. 192.168.0.1

The correct answer is C or D

Explanation: If there is no loopback address than the router chooses the interface with the highest IP address as the router-ID in OSPF process

5.

Which set of action satisfy the requirement for multi-factor authentication?
A. The user swipes a key fob, then clicks through an email link
B. The user enters a user name and password, and then clicks a notification in an authentication app on a mobile device
C. The user enters a PIN into an RSA token, and then enters the displayed RSA key on a login screen
D. The user enters a user name and password and then re-enters the credentials on a second screen

The correct answer is A or B

This is an example of how two-factor authentication (2FA) works:
1. The user logs in to the website or service with their username and password.
2. The password is validated by an authentication server and, if correct, the user becomes eligible for the second factor.
3. The authentication server sends a unique code to the user’s second-factor method (such as a smartphone app).
4. The user confirms their identity by providing the additional authentication for their second-factor method.

6.

An email user has been lured into clicking a link in an email sent by their company’s security organization. The webpage that opens reports that it was safe but the link could have contained malicious code. Which type of security program is in place?

A. Physical access control
B. Social engineering attack
C. brute force attack
D. user awareness

Answer: B or D

Explanation
This is a training program which simulates an attack, not a real attack (as it says “The webpage that opens reports that it was safe”) so we believed it should be called a “user awareness” program. Therefore the best answer here should be “user awareness”. This is the definition of “User awareness” from CCNA 200-301 Offical Cert Guide Book:
“User awareness: All users should be made aware of the need for data confidentiality to protect corporate information, as well as their own credentials and personal information. They should also be made aware of potential threats, schemes to mislead, and proper procedures to report security incidents. “
Note: Physical access control means infrastructure locations, such as network closets and data centers, should remain securely locked.
Please help!!!

Hello, please tell me, are on CCNA 200-301 Simulation(Simlet) questions?

Hello are on ccna 200-301 simlet questions ?

Hello , Any valid dumps please ? Thank you in advance

Would anyone trade the 200-301 Dump for N u d e s?

@ Sarah, are they full n u d e s?

Hi Dan they can be, you can tell me what sort of pics you want and i can take them… e-mail me at Smcgill2000 (at) g m a i l . c o m

Hello fellos

Do we have simulation questions on new 200-301 exam?

Hello , Can you please share with me a free dump for CCNA ? Thank you in advance

Which command automatically generates an IPv6 address from a specified IPv6 prefix and MAC address of an interface?

A. ipv6 address dhcp
B. ipv6 address ads2001:068:5:112::64 eui-64
C. ipv6 address autoconfig
D. ipv6 address 2001:068:5:112:2/64 link-local

Is the correct answer B or C and why?
Now leaning towards B
eui-64 ==> with defined/specified IPv6 prefix+MAC+FFF4
autoconfig ==> received prefix from RA(from router)+MAC+FFFE

Are there no labs in the exam?

@ERAY / Gents: Can you please share the 9tut premium dumps for CCNA 200-301?

Appreciate if could forward it to my email: b o b . o n g . s a @ g m a i l . c o m (Only Remove Space)

Hell on this forum can anybody update if CCNA 200-301 has any lab sim{ simulation} question or should i focus more on my 9tut new premium member study material and composite Quizzes. Final question go to those premium member who has pass the test does, should i study more on new CCNA 200- 301 premium member link or focus more on both CCNA 200-125 and CCNA 200-301. my exam is coming up in a few more days.
Advice or subjection go to #
AADESINA77 At yAHOO DOT COM { At-@, DOT- . }

please share free dump CCNA 200-301 new today? p u t r a c a m p s @ g m a i l . c o m

Hello,
Just a small question, do we need to learn CCNA 200-125 topics for the exam or just 200-301 topics for the new exam?

Hi All, Just to let you know all of those people are saying they have dump and they have passed with high marks are scammers. Please be aware I have lost money with them. don’t fall for them.

hi all,

still no labs in the new certificate exam?

has anyone passed the exam recently?

Question 2

What is the primary effect of the spanning-tree portfast command?
A. It enables BPDU messages
B. It minimizes spanning-tree convergence time
C. It immediately puts the port into the forwarding state when the switch is reloaded
D. It immediately enables the port in the listening state

Answer: C , I everybody is answer B if not why ?

Refer to the exhibit. An engineer is bringing up a new circuit to the MPLS provider on the Gi0/1 interface of Router1. The new circuit uses eBGP and learns the route to VLAN25 from the BGP path.

OSPF_eBGP.jpg

Router1#show ip route
Gateway of last resort is 10.10.11.2 to network 0.0.0.0
10.0.0.0/8 is variably subnetted, 8 subnets, 4 masks
C 10.10.10.0/28 is directly connected, GigabitEthernet0/0
C 10.10.11.0/30 is directly connected, FastEthernet2/0
O 10.10.13.0/25 [110/2] via 10.10.10.1,00:00:32, GigabitEthernet0/0
O 10.10.13.128/28 [110/2] via 10.10.10.1,00:00:32, GigabitEthernet0/0
O 10.10.13.144/28 [110/2] via 10.10.10.1,00:00:32, GigabitEthernet0/0
O 10.10.13.160/29 [110/2] via 10.10.10.1,00:00:32, GigabitEthernet0/0
O 10.10.13.208/30 [110/2] via 10.10.10.1,00:00:32, GigabitEthernet0/0
O 10.10.13.252/30 [110/2] via 10.10.10.1,00:00:32, GigabitEthernet0/0
S* 0.0.0.0/0 [1/0] via 10.10.11.2
What is the expected behavior for the traffic flow for route 10.10.13.0/25?

A. Traffic to 10.10.13.0.25 is load balanced out of multiple interfaces
B. Route 10.10.13.0/25 is updated in the routing table as being learned from interface Gi0/1
C. Traffic to 10.10.13.0/25 is symmetrical
D. Route 10.10.13.0/25 learned via the Gi0/0 interface remains in the routing table

Answer: B, I everybody is answer D if not why ?

@Dell#Ade@

The correct answer is C.

guys how mamy question in premum dump?

I just take my exam and get 971/1000!

Thanks to 9TUT Study material on Premium Member zone.If you subscribe as and study their marital back to back 100 time for two to three months, practice well on your CCNAv7 200-301,Composition Quizzes back to back 100 time. Make sure you know what you are doing. I believe you will passed like me. you do not need any dump or fake dump for now.
One again thanks to 9tut Premium member zone. You got my 5 star rating.

Just to give more detain on Exam for 9tut PREMIUM MEMBER ZONE.
I just take CCNA 200-301 Exam Today I Passed with 97x. Thank you 9tut premium member Your material is very helpful. pass score start @ 825 to 1000. 102 questions , { single answer , multiple answers, Lot of Drag and drop and no lab in my question ,today but thing might tomorrow on lab sim. But your material on CCNA v7 200-301 is helpful . You get my 5 star always!!!!