Share your CCNA Experience
The new CCNA 200-301 has come to replace the old CCNA 200-125 exam so we create the “Share your new CCNA Experience” for everyone to share their experience to prepare for this new exam.
We have a topic of Frequently Asked Questions & Tips for CCNA learners, surely you will find valuable information about the CCNA exam there.
Note:
+ The CCNA 200-301 exam include lab sims, multiple choice and Drag drop questions.
+ You can use shortcut command (like “int”, “no sh”, “conf t”…), “tab” and “?” in the simulations of the exam.
Please share with us your experience to prepare for the new CCNA 200-301 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Your posts are warmly welcome! Hope you will find useful information from friends who have taken the new CCNA exam!
Has any one recently taken the test ? what are the question that you guys came across, i have a test coming up and I am freaking out here !
@Pintu you said that all questions are the same here in the real exam but they change some words ? but is it the same answer from 9tut dumps?
Thanks
Just passed my exam today !
my questions are all in the 9tut premium membership mixed with some of the free questions to the right.
got 3 sim questions though. VLAN and Trunking Configuration Sim, IPv4 and IPv6 Connectivity Sim, the third one new : another VLAN configuration you just have to assign access ports with the VLAN required but cant remmber fully, but its easy though if you learn the concepts/fundamentals.
thanks 9tut!
Please guide me for CCNA 200-301 exam which sim software should I use?
Took mine and its a mix of questions, not so bad. had 3 simulation, 2 about VLANs and 1 about configuring ip address(IPv4 & IPv6) and CDP, LLDP
@Choi, Please read the questions carefully as I got a few questions that seem similar to 9tut but when you actually read it you can understand that the question is different. I hope you get my point. Thanks
need lab dumps
Thank you @Anonymous.
My exam will be this coming Feb.11.
I hope my knowledge will be enough to pass the CCNA exam.
Hello,
Just pass my CCNA,
I have 3 LAB.
NAT
Configure Telnet
NTP Server
ACL
VLAN’s
thank you all
Just passed my exam today !
my questions were all in the 9tut premium membership.
got 3 sim questions though. VLAN and Trunking Configuration Sim, IPv4 and IPv6 Connectivity Sim.
Thanks @9tut.
I am going to study all the questions from part 5 to part 12 and learn all the SIMS, I have already gone thru the syllabus a few times, Hopefully i will pass , exam in 4 days. wish me luck guys.
@need dumps
Hello Guys , does anyone know if “? “is disabled on CCNA exam please ?
@hunterskil23 – Yes – you can use “?” and tab as well. But there are some disabled show commands like show-run , they want more specific show command.
can anyone share the questions pdf file plz share engrfezi at yahoo.com
Hi, I did the exam yesterday. I had 95 questions (3 SIMS, a lot of Drag and Drop questions, and questions). 2 of the SIMS were exactly the same as this website but with different usernames and password details. So you need to make sure to understand the sim and not just study it by heart. The other SIM was totally new. Most of the questions were exactly the same as this website too. Good luck to all those who are going to do it! Thank you so much 9tut!!!!
@CCNAFeb2023 Hi, Do you remember the other sim? what was it about.
@CCNAFeb2023 Congrats on your success!
Tell me please did you remember how many points are SIMS worth relative to total score?
You need to know how to subnet quickly. You need to know how traffic will be routed given a routing table. You need to understand wildcard masks. You need to know how to setup a basic OSPF configuration. You need to know how to setup ipv4/ipv6 IPs on interfaces. You need to know how to apply ip4v/ipv6 static routes. You need to know how to setup a basic etherchannel. Did I mention you need to know how to subnet quickly? If you can do all of the above reasonably well, and understand basic networking to do the multiple choice/drag and drops, you can pass the exam answering less than 70 of 95 questions, providing you do the sims reasonably well – I left nearly 30 questions unanswered and still passed.
Hey I need latest exam dumps I have my exam on this weekend
Is there a similar website for Juniper JNCIA-Junos (JN0-104) as well, please share.
Hi @TUT9, When do you update task 2 , Named Access-list & Port Security Sim
thanks
hello I need latest exam dumps I have my exam on this weekend
plz help me
my gmail: oa554537@gmail(.)com
I recently passed the exam. All the multiple choice and sim questions I got can be found on 9tut. However, out of 3 sim questions I got, there was one that is not found on 9tut yet.
I can’t give you any details unfortunately.
But this much I can tell you: Learn how to create an IPv6 subnet from an IPv6 Global Routing Prefix like 2001:db8::\48 and how to determine the subnet number. Also, you should know how to create a global unicast IPv6 address from it with a unique interface ID (probably via EUI-64).
Remember:
Global Routing Prefix (48 bits) + Subnet (16 bits) = IPv6 Prefix ID/Subnet ID (64 bits).
+ Interface ID (64 Bits) = IPv6 adress
Good luck!
Just passed today .
2 sims ipv4 and ipv6 service and Vlan and trunking
a lot of repetitive drag and drop for ipv6
Questions from 9tut
Advice : pass composite at least 10 times
What is difference between the premium membership and the stardard 9tut access we see now?
@TT M , with premium membership, you ll have access to all LAB sim for practice.
composite quizz test with timer , score and explanation for answers .
it’s worth it as 90 % of CCNA exams are from 9tut composite quizz .
@passed is this “2 sims ipv4 and ipv6 service and Vlan and trunking” on 9tut ?
Passed the exam.
Most of the questions were from here.(~85%)
Got two sims – ospf and Etherchannel. Both from here. :)
Thank You so much @9tut
@kamkz , yes exactly the same as on 9tut.