Share your CCNA Experience
The new CCNA 200-301 has come to replace the old CCNA 200-125 exam so we create the “Share your new CCNA Experience” for everyone to share their experience to prepare for this new exam.
We have a topic of Frequently Asked Questions & Tips for CCNA learners, surely you will find valuable information about the CCNA exam there.
Note:
+ The CCNA 200-301 exam include lab sims, multiple choice and Drag drop questions.
+ You can use shortcut command (like “int”, “no sh”, “conf t”…), “tab” and “?” in the simulations of the exam.
Please share with us your experience to prepare for the new CCNA 200-301 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Your posts are warmly welcome! Hope you will find useful information from friends who have taken the new CCNA exam!
wht does dismiss 153 mean?
Hello folks, these questions valid.?
Hi doka 😊 and all. I know doka since 2018 on in this forum(9tut)
Three are the new questions pls answer:
What is a benefit for external users who consume public cloud resources?
accessed over the Internet
located in the same data center as the users
all hosted on physical servers
implemented over a dedicated WAN
And:?
Which set of actions satisfy the requirement for multifactor authentication?
The user swipes a key fob, then clicks through an email link
The user enters a user name and password, and then re-enters the credentials on a second screen.
The user enters a PIN into an RSA token, and then enters the displayed RSA key on a login screen.
The user enters a user name and password, and then clicks a notification in an authentication app on a mobile device
Ans?
MTU 1300 bytes, 1000000 hit/a, DGY 10 usec,
reliability 255/255, teload 1/255, eload 1/255
Enespaulstion ARPA, loophack not eat
Keepalive not supported
Full Duplex, 1000bps, 1ink type is auto, media type la 4S
output low-control is off, input flow control is off
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:11, output hang navar
Last clearing of “show interface” countara never
Input queue: 0/375/0/0 (sise/max/drops/flushas): Total output drops: 0
Queueing strategy: fito
Output queue: 0/40 (nizo/max)
5 minute input rate 7000 bita/sec, 4 packets/ac
5 minute output rate 4000 bits/sac, 4 packets/aec
22579370 packets input, 8825545968 bytes, 0 no buffer
Received 67 broadcasts (0 IP multicasts) 0 runts, 0 giante, 0 throttles
3612699 input errors, 3612699 CMC, 0 Frane, 0 overrun, 0 ignored O watchdog, 10747057 multicast, 0 pause input
12072167 packets output, 1697953637 bytes, 0 underruns
o output sErors, 0 collisions, 1 interface resets
6 unknown protocol dropa
0 babbles, 0 late collision, 0 deferred
5 lost carrier, 0 no carriar, o pause output
o output buffer failures, 0 output buffers swapped out
Refer to the exhibit What is a reason for poor performance on the network interface?
The bandwidth setting of the interface is misconfigured
The interface is receiving excessive broadcast traffic
The cable connection between the two devices is faulty
The interface is operating at a different speed than the connected device
Ans?
R18 show ip suta
Codes: C connected, s statio, 1-r, A-IV, M mbil, R-DKP D 宝V,A KIUNP extamal, o OGEF, TA OSPF inter ama NT OSPF NINA Aztarnal type 1, 2 OBPP NESA external type 2
21-08PF external type 1, 12 OSPF external type 2, E-KOP 1-18-15, 11-15-18 Invol-1, 12-18-15 level-2-candidate
default
U-por-usor static route, – ODR
Gateway of last resort is not sot
€ 192.168.3.5 is directly connected, Loopback
10.0.0.0/0 in variably sobretted, 4 autoats, 2 asko
10.0.1.3/32 [110/100] via 192.168.0.40, 00:35:08, Serial0
OUOOD
10.0.1.0/24 is directly connected, Serial0
10.0.1.190/32 (110/51 via 192.168.0.35, 00:39:00, Serial0
10.0.1.0/24 1110/10] via 192.168.0.4, 00:39:08. Gigabit Ethernet 0/0
10.0.1.0/20 150/10] via 192.168.0.7, 00:39:0#, Gigabit Ethemet 0/0
Refer to the exhibit Traffic sourced from the loopbacko intertace is trying to connect via sh to the host at 10.0.1 15 What is the next to the
destination address?
192.168.0.7
192.168.0.4
192.168.0.40
192.168 3.5
Which key function is provided by the data plane
making routing decisions
exchanging routing table data
Originating packets
forwarding traffic to the next hop
Ans?
network engineer must implement an IPv6 configuration on the van 2000 interface to create a routable locally-unique unicast address that is blocked from being advertised to the internet. Which configuration must the engineer apply?
A.interface vian 2000
ipv6 address fd00::1234:2343/64
B.interface vlan 2000
ipv6addressff00:0000:aaaa::1234:2343/64
C.interface vian 2000
ipv6 address fc00:0000:aaaa:a15d:1234:2343:8aca/64
Dinterface vlan 2000
ipv6 address fe80:0000:aaaa: 1234:2343/64
Ans:C
What is the difference between 1000BASE-LXAH and 1000BASE-Zetetice
1A.1000BASE-ZX interoperates with dual-rate 100M/1G 10Km SPP oves modstand 1000BASE-LXLH posoly single rate
1000BASE-LXILH interoperates with multimode and single mode liber and 1000BASE-ZX needs a conditioning path cable a multimode
1000BASE-2X is supported on links up to 1000km, and 1000BASE-LXILH operates over links up to 70 km 1000BASE LX/LH is supported on links up to 10km, and 1000BASE ZX operates over niks up to 70 km
Ans?
What is the difference between 1000BASE-LXAH and 1000BASE-Interface
A.1000BASE-ZX interoperates with dual-rate 100M/1G 10Km SPP oves modstand 1000BASE-LXLH posoly single rate
B.1000BASE-LXILH interoperates with multimode and single mode liber and 1000BASE-ZX needs a conditioning path cable a multimode
C.1000BASE-2X is supported on links up to 1000km, and 1000BASE-LXILH operates over links up to 70 km 1
D.000BASE LX/LH is supported on links up to 10km, and 1000BASE ZX operates over niks up to 70 km
Ans?
Passed my certification today. Thanks to 9tut. New questions but also questions you will find on 9tut. Learn them all. Read also about RFC1918, this was one question.
Good Luck!
Hello Herb67 how many new questions were there approx
@Dolly
Approx 15-20% new questions
@Herb67, all others was same as questions as here? Is it enough to know answers from here?
Hello everyone :)
I passed my exam 03-15-2022
Do not trust to study only these questions
I saw 10 new questions
Drag and Drop 100% 9tut
questions 75% 9tut
What is the difference between 1000BASE-LX/AH and 1000BASE-ZX Interface?
A.1000BASE-ZX interoperates with dual-rate 100M/1G 10Km SPP over modstand 1000BASE-LX/LH posoly single rate
B.1000BASE-LX/LH interoperates with multimode and single mode liber and 1000BASE-ZX needs a conditioning path cable a multimode
C.1000BASE-ZX is supported on links up to 1000km, and 1000BASE-LX/LH operates over links up to 70 km 1
D.1000BASE LX/LH is supported on links up to 10km, and 1000BASE-ZX operates over links up to 70 km
Answer: D
Which key function is provided by the data plane?
a) making routing decisions
b) exchanging routing table data
c) Originating packets
d) forwarding traffic to the next hop
Answer: D
Refer to the exhibit. Traffic sourced from the loopback0 Interface is trying to connect via ssh to the host at 10.0.1.15. What Is the next hop to the destination address?
R1# show ip route
Codes: C connected, s statio, 1-r, A-IV, M mbil, R-DKP D 宝V,A KIUNP extamal, o OGEF, TA OSPF inter ama NT OSPF NINA Aztarnal type 1, 2 OBPP NESA external type 2
21-08PF external type 1, 12 OSPF external type 2, E-KOP 1-18-15, 11-15-18 Invol-1, 12-18-15 level-2-candidate
default
U-por-usor static route, – ODR
Gateway of last resort is not set
C 192.168.3.5 is directly connected, Loopback
10.0.0.0/0 in variably subnetted, 4 subnets, 2 masks
10.0.1.3/32 [110/100] via 192.168.0.40, 00:35:08, Serial0
OUOOD
10.0.1.0/24 is directly connected, Serial0
10.0.1.190/32 (110/51 via 192.168.0.35, 00:39:00, Serial0
10.0.1.0/24 1110/10] via 192.168.0.4, 00:39:08. Gigabit Ethernet 0/0
10.0.1.0/20 150/10] via 192.168.0.7, 00:39:0#, Gigabit Ethemet 0/0
Refer to the exhibit Traffic sourced from the loopbacko intertace is trying to connect via sh to the host at 10.0.1 15 What is the next to the
destination address?
1) 192.168.0.7
2) 192.168.0.4 (ANSWER)
3) 192.168.0.40
4) 192.168 3.5
Refer to the exhibit. What is a reason for poor performance on the network interface?
MTU 1300 bytes, 1000000 hit/a, DGY 10 usec,
reliability 255/255, teload 1/255, eload 1/255
Enespaulstion ARPA, loophack not eat
Keepalive not supported
Full Duplex, 1000bps, 1ink type is auto, media type la 4S
output low-control is off, input flow control is off
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:11, output hang navar
Last clearing of “show interface” countara never
Input queue: 0/375/0/0 (sise/max/drops/flushas): Total output drops: 0
Queueing strategy: fito
Output queue: 0/40 (nizo/max)
5 minute input rate 7000 bita/sec, 4 packets/ac
5 minute output rate 4000 bits/sac, 4 packets/aec
22579370 packets input, 8825545968 bytes, 0 no buffer
Received 67 broadcasts (0 IP multicasts) 0 runts, 0 giante, 0 throttles
3612699 input errors, 3612699 CMC, 0 Frane, 0 overrun, 0 ignored O watchdog, 10747057 multicast, 0 pause input
12072167 packets output, 1697953637 bytes, 0 underruns
o output sErors, 0 collisions, 1 interface resets
6 unknown protocol dropa
0 babbles, 0 late collision, 0 deferred
5 lost carrier, 0 no carriar, o pause output
o output buffer failures, 0 output buffers swapped out
A. The interface is receiving excessive broadcast traffic.
B. The cable connection between the two devices is faulty.
C. The interface is operating at a different speed than the connected device.
D. The bandwidth setting of the interface is misconfigured
Answer: B
Thank you @9tut and all those who put in comments and feedback on answers to discuss. Passed exam today.
There were several new questions as expected. Same and similar questions discussed in this 9tut too.
New questions definitely needed bit of through knowledge of contents.
@anishak, how many questions similar or same from here?
Hi, I just took the exam an hour ago, passed it. I would say 98% of the questions are the same. I only encountered about 3 new unknown questions. I would suggest to do the composite quizzes at least 10 times and score above 90% each and it’ll be easy to pass the test. 60% of questions are from the New Questions category and 40% are normal ones.
@CL would say 60-70%, may be 50% is same question as in 9tut, but rest are same questions had additional answer options seemed different, and reset 20% would say new ones. good luck
Hello, I just completed and passed the exam just now. I would say 70-80% of my questions are the same as in 9tut. Good luck everyone!
Hi Friends,
Can you please send me somebody the latest questions?
maxthon54 at gmail dot com
Thank you very much and have a nice day!
passed but barely, but hey a pass is a pass. I would say if you actually study the quesions from here and possible outcomes not just memorize, than you will know about 75 percent of the exam. just want to memorize he questions, than you will get 50 percent. This for sure made it easier though and well worth the money
Anonymous, you only used 9tut for learning?
Passed ccna today worth the buy
New drag and drop question:
drag and drop the elements of security program from the left into the corresponding description on the right:
Options of Left Panel:
Awareness
Education
Security Policy
Security standard
training
Please share the answer.
NEW QUESTION ::
Refer to the exhibit. a network engineer configures the cisco wlc to authenticate the local wireless clients against a radius server. Which task must be performed to complete the process?
A. Change the server status to disable
B. Select Enable next to Management
C. Select Enable next to Network User
D. Change the support for CoA to Enabled
ANSWER: C