Share your CCNA Experience

Refer to the exhibit. a network administrator must permit traffic from the 10.10.0.0/24 subnet to the WAN on interface serial0 what is the effect of the configuration as the administrator applies the command

A. the sourced traffic from ip range 10.0.0.0 – 10.0.0.255 is allowed on serial0
B. the router fails to fapply the access list to the interface
C. The permit command fails and returns an error code
D. the router accepts all incoming trafjbfic to Serial0 with the last octet of the source ip set to 0

Refer to the exhibit. a network administrator must permit traffic from the 10.10.0.0/24 subnet to the WAN on interface serial0 what is the effect of the configuration as the administrator applies the command

A. the sourced traffic from ip range 10.0.0.0 – 10.0.0.255 is allowed on serial0
B. the router fails to fapplAy the access list to the interface
C. The permit command fails and returns an error code
D. the router accepts all incoming trafjbfic to Serial0 with the last octet of the source ip set to 0

If the subnet assigned to a client is available at the remote site, then traffic must be offloaded locally, and subnets are unavailable at the remote site must be tunneled back to the WLC.
Which feature meets these requirements?
A. learn client IP address
B. FlexConnect local authentication
C. VLAN-based central switching
D. central DHCP processing
Answer: C
3 New Question
Which two events are outcomes of a successful RF jamming attack? (Choose two.)
A. disruption of WLAN services
B. unauthentication association
C. deauthentication broadcast
D. deauthentication multicast
E. physical damage to AP hardware
Answer: AE

4 New Question
Which two steps are needed to complete integration of the MSE to Cisco Prime Infrastructure and be able to track the location of clients/rogues on maps? (Choose two.)
A. Synchronize access points with the MSE.
B. Add the MSE to Cisco Prime Infrastructure using the CLI credentials.
C. Add the MSE to Cisco Prime Infrastructure using the Cisco Prime Infrastructure communication credentials configured during set up.
D. Apply a valid license for Wireless Intrusion Prevention System.
E. Apply a valid license for location tracking.
Answer: DE

5. New Question
An engineer is performing a Cisco Hyperlocation accuracy test and executes the cmxloc start command on Cisco CMX. Which two parameters are relevant? (Choose two.)
A. X, Y real location
B. client description
C. AP name
D. client MAC address
E. WLC IP address
Answer: AD

6 New Question
A network engineer observes a spike in controller CPU overhead and overall network utilization after multicast is enabled on a controller with 500 APs. Which feature connects the issue?
A. controller IGMP snooping
B. multicast AP multicast mode
C. broadcast forwarding
D. unicast AP multicast mode
Answer: C
7 New Question
Refer to the exhibit. An engineer must connect a fork lift via a WGB to a wireless network and must authenticate the WGB certificate against the RADIUS server.
Which three steps are required for this configuration? (Choose three.)
A. Configure the certificate, WLAN, and radio interface on WGB.
B. Configure the certificate on the WLC.
C. Configure WLAN to authenticate using ISE.
D. Configure the access point with the root certificate from ISE.
E. Configure WGB as a network device in ISE.
F. Configure a policy on ISE to allow devices to connect that validate the certificate.

Answer: ACF

8 New Question
On a branch office deployment, it has been noted that if the FlexConnect AP is in standalone mode and loses connection to the WLC, all clients are disconnected, and the SSID is no longer advertised.
Considering that FlexConnect local switching is enabled, which setting is causing this behavior?
A. ISE NAC is enabled
B. 802.11r Fast Transition is enabled
C. Client Exclusion is enabled
D. FlexConnect Local Auth is disabled
Answer: D

9 New Question
A user is trying to connect to a wireless network that is configured for WPA2-Enterprise security using a corporate laptop. The CA certificate for the authentication server has been installed on the Trusted Root Certification Authorities store on the laptop. The user has been prompted to enter the credentials multiple times, but the authentication has not succeeded. What is causing the issue?
A. The user Active Directory account is locked out after several failed attempts.
B. There is an IEEE invalid 802.1X authentication policy on the authentication server.
C. There is an invalid 802.1X authentication policy on the authenticator.
D. The laptop has not received a valid IP address from the wireless controller.
Answer: C
10. New Question
An engineer must use Cisco AVC on a Cisco WLC to prioritize Cisco IP cameras that use the wireless network. Which element do you configure in a rule?
A. WMM required
B. mark
C. permit-ACL D. rate-limit
Answer: B

11. New Question
What is the maximum time range that can be viewed on the Cisco DNA Center issues and alarmssw page?
A. 3 days
B. 3 hours
C. 24 hours
D. 7 days
Answer: C

12 New Question
Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?
A. RF Profile
B. AP Join Profile
C. Flex Profile
D. Policy Profile
Answer: C

13 New Question
Which two protocols are used to communicate between the Cisco MSE and the Cisco Prime
Infrastructurenetwork management software? (Choose two.)
A. SOAP
B. NMSP
C. HTTPS
D. SSH
E. Telnet
Answer: B,C

If the subnet assigned to a client is available at the remote site, then traffic must be offloaded locally, and subnets are unavailable at the remote site must be tunneled back to the WLC.
Which feature meets these requirements?
A. learn client IP address
B. FlexConnect local authentication
C. VLAN-based central switching
D. central DHCP processing
Answer: C
3 New Question
Which two events are outcomes of a successful RF jamming attack? (Choose two.)
A. disruption of WLAN services
B. unauthentication association
C. deauthentication broadcast
D. deauthentication multicast
E. physical damage to AP hardware
Answer: AE

7 New Question
Refer to the exhibit. An engineer must connect a fork lift via a WGB to a wireless network and must authenticate the WGB certificate against the RADIUS server.
Which three steps are required for this configuration? (Choose three.)
A. Configure the certificate, WLAN, and radio interface on WGB.
B. Configure the certificate on the WLC.
C. Configure WLAN to authenticate using ISE.
D. Configure the access point with the root certificate from ISE.
E. Configure WGB as a network device in ISE.
F. Configure a policy on ISE to allow devices to connect that validate the certificate.

Answer: ACF

8 New Question
On a branch office deployment, it has been noted that if the FlexConnect AP is in standalone mode and loses connection to the WLC, all clients are disconnected, and the SSID is no longer advertised.
Considering that FlexConnect local switching is enabled, which setting is causing this behavior?
A. ISE NAC is enabled
B. 802.11r Fast Transition is enabled
C. Client Exclusion is enabled
D. FlexConnect Local Auth is disabled
Answer: D

9 New Question
A user is trying to connect to a wireless network that is configured for WPA2-Enterprise security using a corporate laptop. The CA certificate for the authentication server has been installed on the Trusted Root Certification Authorities store on the laptop. The user has been prompted to enter the credentials multiple times, but the authentication has not succeeded. What is causing the issue?
A. The user Active Directory account is locked out after several failed attempts.
B. There is an IEEE invalsid 802.1X authentication policy on the authentication server.
C. There is an invalid 802.1X authentication policy on the authenticator.
D. The laptop has not received a valid IP address from the wireless controller.
Answer: C

Thank you 9tut, I passed my CCNA exam. All the answers to past the exam was from this site. Just like every one said, if you pass the Big Composite quiz with a score of 95% or above at least 10 times, you will pass the exam. Just be careful while taking the exam not to lose focus or be discouraged when you see the 4 to 5 test questions that have been added to the test by the test center. You will be informed of them at the beginning of the exam. Blessings to all of you in obtaining you certification.

6 New Question
A network engineer observes a spike in controller CPU overhead and overall network utilization after multicast is enabled on a controller with 500 APs. Which feature connects the issue?
A. controller IGMP snooping
B. multicast AP multicast mode
C. broadcast forwarding
D. unicast AP multicast mode
Answer: C
7 New Question
Refer to the exhibit. An engineer must connect a fork lift via a WGB to a wireless network and must authenticate the WGB certificate against the RADIUS server.
Which three steps are required for this configuration? (Choose three.)
A. Configure the certificate, WLAN, and radio interface on WGB.
B. Configure the certificate on the WLC.
C. Configure WLAN to authenticate using ISE.
D. Configure the dfaccess point with the root certificate from ISE.
E. Configure WGB as a network device in ISE.
F. Configure a policy on ISE to allow devices to connect that validate the certificate.

Answer: ACF

If the subnet assigned to a client is available at the remote site, then traffic must be offloaded locally, and subnets are unavailable at the remote site must be tunneled back to the WLC.
Which feature meets these requirements?
A. learn client IP address
B. FlexConnect local authentication
C. VLAN-based central switching
D. central DHCP processing
Answer: C
3 New Question
Which two events are outcomes of a successful RF jamming attack? (Choose two.)
A. disruption of WLAN services
B. unauthentication association
C. deauthentication broadcast
D. deauthentication maulticast
E. physical damage to AP hardware
Answer: AE

@Emma plis share some of the drag and drops

Please can someone share the dump
zendasus at gmail dot com

Anyone who passed the CCNA recently exam, can you please share the dump with me, Please
geniusccna 591 at gmaildotcom no spaces please
Many thanks in advance.

Does someone have VCE file?

Any new questions for May? @9tut

Thanks!

Hi, can anyone share VCE file or Big Composite Quiz? appreciate your help!

Hello
I need CCNA exam dumps
I want to take ccna exam in summer

plz
my gmail—> oa554537@gmail(.)com

Thank you in advance

Hello Everyone! Please how can I have the latest dumps?

Hello
I need CCNA exam dumps

If the subnet assigned to a client is available at the remote site, then traffic must be offloaded locally, and subnets are unavailable at the remote site must be tunneled back to the WLC.
Which feature meets these requirements?
A. learn client IP address
B. FlexConnect local authentication
C. VLAN-based central switching
D. central DHCP processing
Answer: C
3 New Question
Which two events are outcomes of a successful RF jamming attack? (Choose two.)
A. disruption of WLAN services
B. unauthentication association
C. deauthentication broadcast
D. deauthentication maulticast
E. physical damage to AP hardware
Answer: AE….

3 New Question
Which two events are outcomes of a successful RF jamming attack? (Choose two.)
A. disruption of WLAN services
B. unauthentication association
C. deauthentication broadcast
D. deauthentication maulticast
E. physical damage to AP hardware
Answer: AE…

I have passed my CCNA test yesterday. Questions were 99% fron here and there is one new drag and drop with TCP/UDP.

I think there were 2 new questions.

Valid, passed will 9xx.
4-5 questions a little different or new.

Does anyone knows if there is a Juniper website with exam questions?

hi there
can anyone shrare ccna dumps at engg _ mohd _ shah @hotmail.com

thnx in advance

hello guys just passed my ccna today with 971. almost 90% of the question are from here. if i can remember very correctly there were like 10 modified questions

If the subnet assigned to a client is available at the remote site, then traffic must be offloaded locally, and subnets are unavailable at the remote site must be tunneled back to the WLC.
Which feature meets these requirements?
A. learn client IP address
B. FlexConnect local authentication
C. VLAN-based central switching
D. central DHCP processing
Answer: C
3 New Question
Which two events are outcomes of a successful RF jamming attack? (Choose two.)
A. disruption of WLAN services
B. unauthenticatifeon association
C. deauthentication broadcast
D. deauthentication maulticast
E. physical damage to AP hardware
Answer: AE

Select two statements that correctly describe frame switching operation?
A. switch only reads destination MAC address
B. switch does frame rewrite
C. switch reads source and destination MAC address
D. switch floods frame ousft all ports except where frame was
learned when destination MAC address is unknown
Answer: C,D

7 New Question
Refer to the exhibit. An engineer must connect a fork lift via a WGB to a wireless network and must authenticate the WGB certificate against the RADIUS server.
Which three steps are required for this configuration? (Choose three.)
A. Configure the certificate, WLAN, and radio interface on WGB.
B. Configure the certificate on the WLC.
C. Configure WLAN to authenticate using ISE.
D. Configure the access point with the root certificate from ISE.
E. Configure WGB as a network device in ISE.
F. Configure a policy on ISE to allow devices to connect that validate the certificate.

Answer: ACF

8 New Question
On a branch office deployment, it has been noted that if the FlexConnect AP is in standalone mode and loses connection to the WLC, all clients are disconnected, and the SSID is no longer advertised.
Considering that FlexConnect local switching is enabled, which setting is causing this behavior?
A. ISE NAC icss enabled
B. 802.11r Fast Transition is enabled
C. Client Exclusion is enabled
D. FlexConnect Local Auth is disabled
Answer: D

Question-
How does a router behave when configured with the default DNS lookup settings, and a URL is entered on the CLI?
A. prompts the user to specify the desired IP address.
B. initiates a ping request to the URL.
C. continuously attemDpts tos resolve the URL until the command is cancelled.
D. attempts to query a DNS server on the network.

Question-
How does a router behave when configured with the default DNS lookup settings, and a URL is entered on the CLI?
A. prompts the user to specify the desired IP address.
B. initiates a ping rdgvcequest to the URL.
C. continuously attempts tos resolve the URL until the command is cancelled.
D. attempts to query a DNS server on the network.

Please share to yaya86 dot t at gmail dot com the latest dump for CCNA thank you in advance

If you got any computer networking tasks and need some assistance in any capacity, hit me up on:
networkingcentre01 @ gmail. Com